If you’ve got a keen eye for detail, then you’ll be pleased to know that we have too! Like you, we have a similar desire to pursue design elegance and excellence we also provide profiles that can give you the end result you are looking for. It is down to your creativity and personal choice to decide how to give your project the specific look & feel you are looking for.
Your creative vision can always be finished perfectly with a Rockpanel Profile. Made from high quality aluminium, almost all of the profiles are available in RAL/NCS colours to match your design. No matter what method of installation is used (patchwork, ship lap or tongue-and-groove) our corner, end or start profiles can be specified and are available for the 6, 8 and 10 mm boards and can be ordered together with your boards.
Here’s a little tip: For Rockpanel Metals, Rockpanel Chameleon and Rockpanel Woods we advise to use Blanc anodized or RAL 9005 (Jet black) profiles.
The standard Rockpanel Profile is available with a blanc anodised finish, which provides a sustainable finishing touch. With a thickness of 1.1 mm the risk of warping is minimized at larger spans.
Only availabel in Clear anodised / RAL 9005 / RAL 9010
Finishing the edges with a corner solution is purely to meet your design and aesthetic requirements. We offer a range of corner solutions that give an extra dimension and an attractive finish to your design.
The edges of the Rockpanel boards require no treatment to protect them from moisture. This is a key benefit over other board materials like wood and fibre cement (FCB) board.
 |
| Natural aged dark-brown edges Without finishing, the basic material changes colour to a natural dark brown through the effect of UV. |
 |
| Edge paint (500 ml bottles) Finishing the sides with matching colour paint is another option. Read our tips & tricks! |
 |
Corner profiles (in RAL Colour) |
 |
| Mitre Joint For the highly skilled installer, a mitre joint can be made with the material, thereby creating a precise and uniform finish. Important: the minimum panel thickness for this solution is 8 mm. |
We manufacture board material mostly used in ventilated constructions, for facade cladding, roof detailing, soffits and fascias.
